Thomson DCM475

Thomson DCM475

Emulator User Guide WebUI Address: http://192.168.100.1 Resetting: Push and hold the button between 0 and 5 seconds ?? Reboot the device Between 6 and 10 seconds ?? Display the channel bonding status for DS and US After 11 seconds ?? Perform the factory reset (This operation should only be performed upon your Cable-Operator’s request)

Thomson DCM425

Thomson DCM425

Emulator User Guide WebUI Address: http://192.168.100.1 Resetting: Basic Reset – Press and release the switch to make it perform the same function as disconnecting the power from the modem. It will start up again in Initialization Mode Factory Default Reset – Unplug the modem from the AC power. Press and hold the reset switch while plugging the modem into AC […]

ZyXEL VSG1432

ZyXEL VSG1432

Emulator User Guide WebUI Address: http://192.168.1.1 Username: admin Password: 1234 Resetting: Make sure the POWER LED is on (not blinking). To set the device back to the factory default setting, press the RESET button for ten seconds or until the POWER LED begins to blink and then release it. When the POWER LED begins to blink, the defaults have been […]

TP-LINK TD-8816

TP-LINK TD-8816

Emulator User Guide WebUI Address: http://192.168.1.1 Username: admin Password: admin Resetting: With the Router powered on, press and hold the RESET button on the rear panel for 8 to 10 seconds before releasing it.   Thanks to Rizwaan Qasim for contributing the TD-8816 emulator.

Thomson Gateway 585v8

Thomson Gateway 585v8

Emulator User Guide CLI Guide WebUI Address: http://192.168.1.254 WebUI Address: http://dsldevice.lan Username: Administrator Password: Resetting: Make sure the Thomson Gateway is turned on. Use a pen or an unfolded paperclip to push the recessed reset button on the back panel. The reset button is marked with a red circle. Push it until the power LED lights red – this will […]

SpeedTouch 546v6

SpeedTouch 546v6

Emulator User Guide CLI Guide WebUI Address: http://192.168.1.254 WebUI Address: http://dsldevice.lan Username: Administrator Password: Resetting: Make sure the Thomson Gateway is turned on. Use a pen or an unfolded paperclip to push the recessed reset button on the back panel. The reset button is marked with a red circle. Push it until the power LED lights red – this will […]

SpeedTouch 516v6

SpeedTouch 516v6

Emulator User Guide CLI Guide WebUI Address: http://192.168.1.254 WebUI Address: http://dsldevice.lan Username: Administrator Password: Resetting: Make sure the Thomson Gateway is turned on. Use a pen or an unfolded paperclip to push the recessed reset button on the back panel. The reset button is marked with a red circle. Push it until the power LED lights red – this will […]