SmartRG SR505n

SmartRG SR505n

Emulator User Manual WebUI Address: http://192.168.1.1 Username: admin Password: admin Resetting: To reset the gateway to its factory default settings press the reset switch for 6 to 8 seconds. After releasing the reset switch the gateway will continue booting with a factory default configuration. IMPORTANT: Pressing the reset switch for more than 10 seconds causes the SmartRG gateway to reset […]

Sagemcom 2864

Sagemcom 2864

Reference Guide Bell WebUI Address: http://192.168.2.1 WebUI Address: http://home Username: admin Password: admin Resetting: With the power on, press and hold the reset button on the bottom of the modem until the power light turns off.

SMC D3GN-RES

SMC D3GN-RES

User Guide User Guide Rogers WebUI Address: http://192.168.0.1 Username: cusadmin Password: password Resetting: Leave power plugged into the Gateway. Find the Reset button on the back panel, then press and hold it for at least 10 seconds. Release the Reset button.

Motorola SB6121

Motorola SB6121

Emulator User Guide WebUI Address: http://192.168.100.1 Resetting: Access the WebUI (http://192.168.100.1) Choose Configuration Click Reset All Defaults and confirm by choosing OK Click Restart Cable Modem and confirm by choosing OK (Resetting may take 5-30 minutes.)

Motorola SB6120

Motorola SB6120

Emulator User Guide WebUI Address: http://192.168.100.1 Resetting: Access the WebUI (http://192.168.100.1) Choose Configuration Click Reset All Defaults and confirm by choosing OK Click Restart Cable Modem and confirm by choosing OK (Resetting may take 5-30 minutes.)

Motorola SB5102

Motorola SB5102

Emulator User Guide WebUI Address: http://192.168.100.1 Resetting: Access the WebUI (http://192.168.100.1) Choose Configuration from the sidebar Click Restore Factory Defaults and confirm by choosing OK Click Restart Cable Modem and confirm by choosing OK (Resetting may take 5-30 minutes.)

Motorola SB5101N

Motorola SB5101N

Emulator User Guide WebUI Address: http://192.168.100.1 Resetting: Access the WebUI (http://192.168.100.1) Choose Configuration from the sidebar Click Restore Factory Defaults and confirm by choosing OK Click Restart Cable Modem and confirm by choosing OK (Resetting may take 5-30 minutes.)

Thomson DCM476

Thomson DCM476

Emulator User Guide WebUI Address: http://192.168.100.1 Resetting: Push and hold the button between 0 and 5 seconds ?? Reboot the device Between 6 and 10 seconds ?? Display the channel bonding status for DS and US After 11 seconds ?? Perform the factory reset (This operation should only be performed upon your Cable-Operator’s request)