SMC D3GN-RES

SMC D3GN-RES

User Guide User Guide Rogers WebUI Address: http://192.168.0.1 Username: cusadmin Password: password Resetting: Leave power plugged into the Gateway. Find the Reset button on the back panel, then press and hold it for at least 10 seconds. Release the Reset button.

Motorola SB6121

Motorola SB6121

Emulator User Guide WebUI Address: http://192.168.100.1 Resetting: Access the WebUI (http://192.168.100.1) Choose Configuration Click Reset All Defaults and confirm by choosing OK Click Restart Cable Modem and confirm by choosing OK (Resetting may take 5-30 minutes.)

Motorola SB6120

Motorola SB6120

Emulator User Guide WebUI Address: http://192.168.100.1 Resetting: Access the WebUI (http://192.168.100.1) Choose Configuration Click Reset All Defaults and confirm by choosing OK Click Restart Cable Modem and confirm by choosing OK (Resetting may take 5-30 minutes.)

Motorola SB5102

Motorola SB5102

Emulator User Guide WebUI Address: http://192.168.100.1 Resetting: Access the WebUI (http://192.168.100.1) Choose Configuration from the sidebar Click Restore Factory Defaults and confirm by choosing OK Click Restart Cable Modem and confirm by choosing OK (Resetting may take 5-30 minutes.)

Motorola SB5101N

Motorola SB5101N

Emulator User Guide WebUI Address: http://192.168.100.1 Resetting: Access the WebUI (http://192.168.100.1) Choose Configuration from the sidebar Click Restore Factory Defaults and confirm by choosing OK Click Restart Cable Modem and confirm by choosing OK (Resetting may take 5-30 minutes.)

Thomson DCM476

Thomson DCM476

Emulator User Guide WebUI Address: http://192.168.100.1 Resetting: Push and hold the button between 0 and 5 seconds ?? Reboot the device Between 6 and 10 seconds ?? Display the channel bonding status for DS and US After 11 seconds ?? Perform the factory reset (This operation should only be performed upon your Cable-Operator’s request)

Thomson DCM475

Thomson DCM475

Emulator User Guide WebUI Address: http://192.168.100.1 Resetting: Push and hold the button between 0 and 5 seconds ?? Reboot the device Between 6 and 10 seconds ?? Display the channel bonding status for DS and US After 11 seconds ?? Perform the factory reset (This operation should only be performed upon your Cable-Operator’s request)

Thomson DCM425

Thomson DCM425

Emulator User Guide WebUI Address: http://192.168.100.1 Resetting: Basic Reset – Press and release the switch to make it perform the same function as disconnecting the power from the modem. It will start up again in Initialization Mode Factory Default Reset – Unplug the modem from the AC power. Press and hold the reset switch while plugging the modem into AC […]