SmartRG SR505n

SmartRG SR505n

Emulator User Manual WebUI Address: http://192.168.1.1 Username: admin Password: admin Resetting: To reset the gateway to its factory default settings press the reset switch for 6 to 8 seconds. After releasing the reset switch the gateway will continue booting with a factory default configuration. IMPORTANT: Pressing the reset switch for more than 10 seconds causes the SmartRG gateway to reset […]

Sagemcom 2864

Sagemcom 2864

Reference Guide Bell WebUI Address: http://192.168.2.1 WebUI Address: http://home Username: admin Password: admin Resetting: With the power on, press and hold the reset button on the bottom of the modem until the power light turns off.

ZyXEL VSG1432

ZyXEL VSG1432

Emulator User Guide WebUI Address: http://192.168.1.1 Username: admin Password: 1234 Resetting: Make sure the POWER LED is on (not blinking). To set the device back to the factory default setting, press the RESET button for ten seconds or until the POWER LED begins to blink and then release it. When the POWER LED begins to blink, the defaults have been […]

TP-LINK TD-8816

TP-LINK TD-8816

Emulator User Guide WebUI Address: http://192.168.1.1 Username: admin Password: admin Resetting: With the Router powered on, press and hold the RESET button on the rear panel for 8 to 10 seconds before releasing it.   Thanks to Rizwaan Qasim for contributing the TD-8816 emulator.

Thomson Gateway 585v8

Thomson Gateway 585v8

Emulator User Guide CLI Guide WebUI Address: http://192.168.1.254 WebUI Address: http://dsldevice.lan Username: Administrator Password: Resetting: Make sure the Thomson Gateway is turned on. Use a pen or an unfolded paperclip to push the recessed reset button on the back panel. The reset button is marked with a red circle. Push it until the power LED lights red – this will […]

SpeedTouch 546v6

SpeedTouch 546v6

Emulator User Guide CLI Guide WebUI Address: http://192.168.1.254 WebUI Address: http://dsldevice.lan Username: Administrator Password: Resetting: Make sure the Thomson Gateway is turned on. Use a pen or an unfolded paperclip to push the recessed reset button on the back panel. The reset button is marked with a red circle. Push it until the power LED lights red – this will […]

SpeedTouch 516v6

SpeedTouch 516v6

Emulator User Guide CLI Guide WebUI Address: http://192.168.1.254 WebUI Address: http://dsldevice.lan Username: Administrator Password: Resetting: Make sure the Thomson Gateway is turned on. Use a pen or an unfolded paperclip to push the recessed reset button on the back panel. The reset button is marked with a red circle. Push it until the power LED lights red – this will […]